Last 2 spark plugs on driver's side are possibly cross threaded, cyl. 6 spark plug was soaked in oil. Needs long block but customer requested to replace spark plugs and cyl. 6 ignition coil at this time.
Remove and replace oil and oil Filter, Lube Chassis and rubber bushings. Inspect brakes, suspension and steering. Check tire pressures and all Fluid Levels. Inspect belts and hoses. Inspect exhaust system, lights and accessories. Rotate tires if necessary.
David F. gave our service a 5 star review on 11/28/2023
Lube Chassis and rubber bushings. Inspect brakes, suspension and steering. Check tire pressures and all Fluid Levels. Inspect belts and hoses. Inspect exhaust system, lights and accessories. Rotate tires if necessary. All checks good.
Nida H. gave our service a 5 star review on 11/10/2023
Remove and replace oil and oil Filter, Lube Chassis and rubber bushings. Inspect brakes, suspension and steering. Check tire pressures and all Fluid Levels. Inspect belts and hoses. Inspect exhaust system, lights and accessories. Rotate tires if necessary.
Leonard C. gave our service a 5 star review on 5/25/2023
Remove and replace oil and oil Filter, Lube Chassis and rubber bushings. Inspect brakes, suspension and steering. Check tire pressures and all Fluid Levels. Inspect belts and hoses. Inspect exhaust system, lights and accessories. Rotate tires if necessary.
Evan S. gave our service a 5 star review on 2/9/2023
Computer scan for codes, found codes P0806, P2122 = clutch position sensor an throttle position sensor. Remove and replace clutch position sensor, clear computer and road test. Code P0806 returns and accelerator position sensor code is gone. With clutch position sensor code returning and hard shifting when cold, highly suspect bad clutch master cylinder is bad. RECOMMEND DEALER OR CORVETTE SPECIALIST.
Willam D. gave our service a 5 star review on 12/9/2022
Remove and replace oil and oil Filter, Lube Chassis and rubber bushings. Inspect brakes, suspension and steering. Check tire pressures and all Fluid Levels. Inspect belts and hoses. Inspect exhaust system, lights and accessories. BRAKE VIBRATION AT HWY SPEEDS
Remove and replace front brake pads and machine brake rotors. Lube front brake caliper slides and repack wheel bearings when necessary. Inspect rear brakes, clean and adjust and road test.
Mike A. gave our service a 5 star review on 8/14/2022
Computer scan for codes, found codes P0300, P0059 = oxygen sensor heater and random misfire. Found mass-air flow sensor out of range. Remove and replace mass-air flow sensor. Remove and replace bank-2, sensor-1 oxygen sensor, clear computer and road test.
Justin C. gave our service a 5 star review on 4/22/2022